CJSBN - E-313-B, 609
- MSDS: CJSBN
- Manufacturer: PIEDMONT DIELECTRICS CORP
- Product Name: E-313-B, 609
- National Stock Number: 8010-01-462-7056
Product Identification
Product ID:E-313-B, 609
MSDS Date:09/08/1989
FSC:8010
NIIN:01-462-7056
Status Code:A
Kit Part:Y
MSDS Number: CJSBN
Responsible Party
US
Emergency Phone: 803-476-8141
Info Phone: 803-476-8141
Cage: 4U971
Contractor
Telephone: 803-476-8141
Cage: 4U971
Ingredients
NON-HAZARDOUS INGREDIENTS
Hazards
LD50 LC50 Mixture:LD50: (ORAL, RAT) 4240 MG/KG
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:IRRITATION: SKIN: MODERATE SPI CLASS
3. EYE: VAPOR IRRITANT. LIQUID MAY CAUSE SEVERE IRRITATION WITH
POSSIBLE IRREVERSIBLE INJURY. SENSITIZATION: (GUINEA PIG) MODERATE.
RESPIRATORY: VAPORS MAY CAUSE N AUSEA, VOMITING AND IRRITATION.
DERMAL LD50 (RABBIT) 600 MG/KG.
Effects of Overexposure:SKIN AND EYE IRRITATION. POSSIBLE
SENSITIZATION.
First Aid
First Aid:INHALATION: REMOVE TO FRESH AIR. GIVE OXYGEN AND ARTIFICIAL
RESPIRATION IF NECESSARY. INGESTION: IF CONSCIOUS, GIVE WATER OR
MILK AND INDUCE VOMITING. SKIN: WASH WITH SOAP AND WATER. DISCARD
SHOES. WA SH CLOTHES BEFORE REUSE. EYES: FLUSH WITH WATER FOR AT
LEAST 30 MINUTES. CALL A PHYSICIAN.
Fire Fighting
Flash Point Method:PMCC
Flash Point:=93.3C, 200.F
Extinguishing Media:CARBON DIOXIDE, DRY CHEMICAL, WATER MIST.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SPILLS: REMOVE ALL SOURCES OF IGNITION. ABSORB
ON COMBUSTIBLE MATERIAL FOR PROPER DISPOSAL. FLUSH CONTAMINATED
AREAS WITH WATER.
Handling
Handling and Storage Precautions:CAUSES IRRITATION. HARMFUL IF INHALED.
AVOID CONTACT WITH EYES, SKIN AND CLOTHING. AVOID BREATHING VAPORS
OR DUST. USE WITH ADEQUATE VENTILATION.
Exposure Controls
Respiratory Protection:NIOSH APPROVED ORGANIC VAPOR RESPIRATOR
RECOMMENDED.
Ventilation:LOCAL EXHAUST RECOMMENDED. MECHANICAL EXHAUST (GENERAL)
RECOMMENDED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEMICAL WORKERS GOGGLES AND FULL LENGTH
FACESHIELD .
Other Protective Equipment:EYE WASH AND DELUGE SHOWER MEETING ANSI
DESIGN CRITERIA . FULL BODY COVERING CLOTHING, SAFETY SHOES.
Supplemental Safety and Health
PHYSICAL DATA: MOLECULAR WEIGHT: N/A. PRODUCT IDENTITY INFORMATION:
CHEMICAL NAME AND SYNONYMS: EPOXY RESIN HARDENER; CHEMICAL FAMILY:
POLY(AMIDO-AMINE). HAZARDOUS MIXTURES OF OTHER LIQUIDS, SOLIDS OR
GASES: N/A.
Chemical Properties
Boiling Pt:>200.C, 392.F
Spec Gravity:0.95
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR YELLOW LIQUID; AMMONIACAL ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES.
Disposal
Waste Disposal Methods:INCINERATION IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REGULATIONS.
Other Information
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.
Ecology
Ecological:SCQMD INFORMATION: IS THERE A PHOTOCHEMICALLY REACTIVE
MATERIAL PRESENT? NO. WHAT IS THE % BY VOLUME OF PHOTOCHEMICALLY
REACTIVE MATERIAL? 0. WHAT IS THE VOC CONTENT? 40G/L. WHAT IS THE
VAPOR PRESSURE OF VOC'S? <0.1 MM HG@ 20C.
Transport
Transport Information:DEPARTMENT OF TRANSPORTATION (DOT): PROPER
SHIPPING NAME: CONSUMER COMMODITY. HAZARD CLASS: ORM-D.
IDENTIFICATION NUMBER: NONE. PACKING GROUP: NONE. LABEL:NOT
REQUIRED.
Regulatory
SARA Title III Information:SUPERFUND AMENDMENTS REAUTHORIZATION ACT
(SARA) SECTION 313 CHEMICAL RELEASE REPORTING INFORMATION 40 CFR
372.45(A-G). ADDENDUM TO MSDS, DO NOT DETACH FROM MSDS, IF MSDS IS
COPIED, 313 INFORMATION MUS T BE INCLUDED: ANTIMONY 5.7%; ALUMINUM
OXIDE 47.1%, AGGREGATE (CHROMIUM, MANGANESE, NICKEL, ZINC) 0.5%.
State Regulatory Information: